Monthly Archives: May 2011
The changes in the new wavecom plugin with respect to the generic GSM plugin are:
- AT+CPIN? replies are not ended with OK. A custom regex match was added to support CPIN? replies without OK (also had to hack the generic MM code to handle plugin-provided regular expressions).
- Disabled default power-up comand, AT+CFUN=1. This command does a full software reset in the device, including the USB stack, so the connection is closed. No additional command seems to be needed, as the modem wakes up by default in CFUN=1 (full functionality) mode. Anyway, an additional check was added during initialization so that this mode is ensured.
- Enabled RTS/CTS instead of XOFF/XON flow control.
- Implemented access technology retrieval using AT+WGPRS=9,2 to query network capabilities
- Ensure the modem uses the highest possible mobile class. These modems can be configured to use different mobile classes. For each kind of modem, the best mobile class is the highest one available, in the following order:
- Class A (3G only mode)
- Class B (PS or CS, GPRS/EDGE or GSM)
- Class CG (PS only, GPRS/EDGE)
- Class CC (CS only, GSM)
- Implemented setting and getting allowed mode, for both 2G and 3G based modems (using AT+WWSM command in the 3G case).
- Implemented setting and getting frequency bands for 2G modems (with AT+WMBS) and 3G modems (with AT+WUBS).
Still, the plugin could be improved even more. For example, there is no secondary port handling in the current plugin implementation, which means that signal strength value will not be updated while the modem is in connected state. This kind of modems support setting up virtual ports by multiplexing the serial channel (CMUX), but ModemManager doesn’t handle this yet.
If anyone has one of this Wavecom/SierraWireless modems at home, please test it with latest ModemManager and report any errors found.